General Fabrication Shop Safety

Screen Shot 2021 01 14 at 7.39.57 AM
Cogbill Safety Tuesday January 12th, 2021

In the Metal Fabrication Industry, safety is the most important element of your job. If you are not cautious and follow good safety practices, injury, or even death, can easily occur. Keep in mind the following general fabrication shop safety practices to keep you and others safe.

1. Wear appropriate PPE for your job

  • Glasses/Face shield

  • Appropriate Footwear (ex: Steel Toe Boots)

  • Gloves (ex: Rubber, Leather, Welding, Etc.)

  • Long Sleeves

  • FRP Clothing

2. Equipment Safety

  • Be properly trained on how to use the equipment you will be working with

  • Inspect before each use

  • Don’t remove guards or covers

  • Know where the emergency stop is

  • Be aware of your surroundings

  • Keep equipment and work area clean

3. Electrical

  • Inspect cords for damage

  • Make sure cords are grounded

  • If you suspect an issue, do not use. Contact someone with electrical qualifications to fix the issue

4. Compressed Gases

  • Store Properly

  • Keep containers labeled so they can be easily identified

  • Handle with care to prevent a reaction from the gases

5. Fire Prevention

  • Make sure fire extinguishers are in an easily located spot

  • Use fire blankets/shields to prevent welding sparks from getting on flammable surfaces

  • Keep flammable liquid in appropriate storage containers. Handle with care.

6. Welding Safety

  • Wear appropriate PPE

  • Make sure you are working in a properly ventilated area

  • Be aware of people in your area to not get sparks on them

Blog Archive